There are many frustrating ways to find yourself locked out. At the top of the list is a common complaint for many drivers: their vehicle key becomes stuck in the ignition. Any issue with your vehicle can mean hours lost on a busy workday, missed appointments and deadlines, and unnecessary exposure to inclement weather.
The first instinct of most people who experience problems with their ignition keys is to call a locksmith. But there are a few steps that can be taken on your own to help you troubleshoot, and even solve issues that may arise with your ignition key. Thanks to the guys at GI Locksmith Located in Downtown Memphis, here are some valuable information on the subject.
What Causes Ignition Key Problems
There are actually several possible causes of issues with a vehicle’s ignition key. These can include:
– Loose wires somewhere inside the ignition mechanism
– A lock cylinder that has become jammed
– A shift interlock that has become out of order
– An issue with the cable in the steering column
What to Do If Your Ignition Key Gets Stuck
The most important thing anyone can do when an issue with the ignition has been discovered is not to panic. Panic can make a situation much worse than it actually is.
For a key stuck in the ignition, the first thing you might wish to try is to turn the steering wheel to the left and right. Then, try removing the key. If you are successful, then your problem will be resolved, and you can store this solution away in the event that it happens again.
If turning the steering wheel did not work, this could indicate damage to the wheel locking system. If this is the case, usually turning the steering wheel in a direction that’s opposite of the wheel position will help. This is because the key can often become stuck in the ignition when the car has been turned off with the wheels turned. Pressure builds in the steering column, causing the key to become stuck. However, once that pressure has been released, you will usually hear a click and be able to release the key.
If your ignition key is stuck and you are unable to lock your vehicle, this may require more immediate attention. When this happens, it can commonly be attributed to the shifter’s mechanism. Issues with the shifter can also mean an out-of-order shift interlock, which may cause the airbags in your vehicle to deploy unexpectedly and cause serious injury.
Some say that using lubricant spray on the car key can help prevent it from becoming stuck. Another potential solution is white graphite powder, which can also be used on the key. This will repel dirt and debris from getting on the key and ultimately into your ignition mechanism.
Although this may not go for everyone, it’s important to only use your ignition key in the ignition of your vehicle. Avoid using your key to open cans, as a screwdriver or as some other tool. This can damage the teeth on the key, causing future sticking problems.
Whatever you do, do not force-turn the key while it is in the ignition. Keys are made with soft metal, which means if you use tools to force the key to turn, the key can easily break off in the ignition-a much more complex and expensive problem than you originally started with. You can usually fix the problem in a few minutes of less by completing a few simple steps.
Problem: Your steering column lock may be applying pressure to the ignition mechanism, prohibiting it from turning.
Solution: First, you will need to try to find a position where your key is able to turn in the ignition. Apply pressure to the key, as if you were going to start you vehicle, and gently turn the wheel from left to right until the key is able to turn.
Problem: The car is in the wrong position.
Solution: Many vehicles will not let you start the engine if the car is not in “park” or “neutral.” Check to make sure your car is in park, then try to turn the ignition.
Problem: The lock cylinder is dirty.
Solution: Dirt and grime can prohibit your lock cylinder from functioning properly. Use electrical contact cleaner to remove the dirt from the mechanism. Then add a small drop of graphite lubricant. Do not use oil on the lock cylinder. Dust and dirt are attracted to oil. As the cylinders get dirtier, the tumblers will be prevented from moving, which means they will have trouble unlocking. Acceptable lubricants include graphite and silicone. Be sure to leave your car door open when cleaning the cylinder, as the fumes from the cleaner can be hazardous.
Problem: The tumbler is locked.
Solution: Tumblers (included on some lock cylinders) can get stuck in a locked position. Try tapping the lock cylinder with a tack hammer, which can cause the springs in the tumbler to release it from the locked position.
Problem: Your key is bent.
Solution: While this is not the most common problem, your key can become bent, which will prevent it from fitting correctly in the ignition, and turning. Your key may not be visibly crooked, so lay it on a flat surface to see if the key is bent. If your key is bent, use a wooden block (or similar tool) to gently tap it back into its original shape (while it is laying on a flat surface). Again, do not use a metal hammer or similar object to bend your key, as keys are made with soft metal and can break easily.
Read More
Many automobile locksmiths specialize in locally replacing car keys. The best way to find a Honda Locksmith is to go to google.com and just type automobile locksmith in combination with your local town where you live. Years ago locksmith had it easy, keys were cut out right there on the spot. Nowadays, some cars contain an encoded computer chip, making your car key unique. Locksmiths nowadays are equipped with special hardware and software that will reprogram a replacement key to imitate that of the original key so that it will work. They are knowledgeable about the designs of most, if not all, types and brands of vehicles, and they simply cut the pattern on a replacement key and input a reprogrammed computer chip so that your car will think that the replacement key is original. It is important to choose a company with many reviews to ensure they are professionals and know what they are doing customer service-wise. Also, if you just happen to be in Phoenix, Arizona, I’d advise you to check out 
A couple of precautions need to be taken when choosing a locksmith service for Honda keys. First and foremost when you begin your search for a locksmith it is best if you can research one on the internet as opposed to only using the phone book. Of course word of mouth referrals are always good since you have a friend or family member that has used the service before, but if it is your first time looking for one the internet is a great way to start.
Unlocking old car locking system was easy, they were not complex and it was easy to manipulate the lock or create the duplicate key in order to solve a car lockout situation, but the modern cars are equipped with sophisticated lock system. The professional locksmiths are equipped with advanced tools as well as skill to unlock your car in a jiffy. You don’t have to rely on the 
You never know when you could find yourself stuck in such unpleasant situation, better save the number of the locksmith under the emergency number in your phone and call them anytime. Most of the locksmith offer emergency service to their clients. You can call them midnight or early morning to help you in unlocking your car lock. No matter how advance the car lock system is, the locksmith can find replace your lost keys and if you’re in Los Angeles, seek out LA Car Key Pros (
An easy way to find a good locksmith is by simply asking around. Talk to family and friends who have had to use a locksmith in the past. Find out what they thought about their locksmith and what sort of prices they paid for 
The next step after finding a potential company involves the process of calling and asking them questions. This way you get a better feel for the type of customer service. In addition, ask them about their prices, as well as the types of payments they take. Another thing to ask is whether they have any type of additional fees in some situations.
The ignition switch of today has become more complex, earlier it was simple, three-position switch with Off, On and Start. The ignition switch is now linked to sensors, interlocks, anti-theft devices and the bank. The failure of an ignition switch typically is fortunately traced to a loose wire.The ignition coil takes the weak battery power and turns it into a spark that is powerful enough to ignite your fuel’s vapor. There are two coils of while in the ignition coil and they are right on top of each other called windings. The windings are differentiated as primary and secondary. The primary winding gathers the power to create a spark. The secondary winding sends it to the distributor.
Basically, a car engine is like a large pump. Air and gas are being pumped in and exhaust is being pumped out. There is a by-product of excess energy that is being sent to the wheels and exhaust (which exits through the tailpipe). Your car’s engine combines the air and the fuel, and adds a spark. This is what we refer to as ignition.