There are many frustrating ways to find yourself locked out. At the top of the list is a common complaint for many drivers: their vehicle key becomes stuck in the ignition. Any issue with your vehicle can mean hours lost on a busy workday, missed appointments and deadlines, and unnecessary exposure to inclement weather.
The first instinct of most people who experience problems with their ignition keys is to call a locksmith. But there are a few steps that can be taken on your own to help you troubleshoot, and even solve issues that may arise with your ignition key. Thanks to the guys at www.losangeleslocksmithpros.com, here are some valuable information on the subject.
What Causes Ignition Key Problems
There are actually several possible causes of issues with a vehicle’s ignition key. These can include:
– Loose wires somewhere inside the ignition mechanism
– A lock cylinder that has become jammed
– A shift interlock that has become out of order
– An issue with the cable in the steering column
What to Do If Your Ignition Key Gets Stuck
The most important thing anyone can do when an issue with the ignition has been discovered is not to panic. Panic can make a situation much worse than it actually is.
For a key that is stuck in the ignition, the first thing you might wish to try is to turn the steering wheel to the left, and then to the right. Then, try removing the key. If you were successful, then your problem has been resolved, and you can store this solution away in the event that it happens again.
If turning the steering wheel did not work, this could indicate damage to the wheel locking system. If this is the case, usually turning the steering wheel in a direction that’s opposite of the wheel position will help. This is because many times, the key can become stuck in the ignition when the car has been turned off with the wheels turned. Pressure builds in the steering column, causing the key to become stuck. However, once that pressure has been released, you will usually hear a click and be able to release the key.
If you find that your ignition key is stuck and you are not able to lock your vehicle, this may require more immediate attention. When this happens, it can commonly be attributed to the mechanism of the shifter. Issues with the shifter can also mean an out-of-order shift interlock, which may cause the airbags in your vehicle to deploy unexpectedly and cause you serious injury.
Some say that using lubricant spray can help your ignition key from becoming stuck. This can be sprayed on the car key itself. Another potential solution is white graphite powder, which can be used on the key as well. This will repel any dirt and debris from getting on the key, and ultimately into your ignition mechanism.
Although this may not go for everyone, it’s important to only use your ignition key in the ignition of your vehicle. Avoid using your key to open cans, as a screwdriver or as some other tool. This can damage the teeth on the key, causing future sticking problems.
Whatever you do, do not force-turn the key while it is in the ignition. Keys are made with soft metal, which means if you use tools to force the key to turn, the key can easily break off in the ignition-a much more complex and expensive problem than you originally started with. You can usually fix the problem in a few minutes of less by completing a few simple steps.
Problem: Your steering column lock may be applying pressure to the ignition mechanism, prohibiting it from turning.
Solution: First, you will need to try to find a position where your key is able to turn in the ignition. Apply pressure to the key, as if you were going to start you vehicle, and gently turn the wheel from left to right until the key is able to turn.
Problem: The car is in the wrong position.
Solution: Many vehicles will not let you start the engine if the car is not in “park” or “neutral.” Check to make sure your car is in park, then try to turn the ignition.
Problem: The lock cylinder is dirty.
Solution: Dirt and grime can prohibit your lock cylinder from functioning properly. Use electrical contact cleaner to remove the dirt from the mechanism. Then add a small drop of graphite lubricant. Do not use oil on the lock cylinder. Dust and dirt are attracted to oil. As the cylinders get dirtier, the tumblers will be prevented from moving, which means they will have trouble unlocking. Acceptable lubricants include graphite and silicone. Be sure to leave your car door open when cleaning the cylinder, as the fumes from the cleaner can be hazardous.
Problem: The tumbler is locked.
Solution: Tumblers (included on some lock cylinders) can get stuck in a locked position. Try tapping the lock cylinder with a tack hammer, which can cause the springs in the tumbler to release it from the locked position.
Problem: Your key is bent.
Solution: While this is not the most common problem, your key can become bent, which will prevent it from fitting correctly in the ignition, and turning. Your key may not be visibly crooked, so lay it on a flat surface to see if the key is bent. If your key is bent, use a wooden block (or similar tool) to gently tap it back into its original shape (while it is laying on a flat surface). Again, do not use a metal hammer or similar object to bend your key, as keys are made with soft metal and can break easily.
Read More
Normally, automobile locksmiths charge much cheaper than car dealers. Locksmiths are experts when it comes to car key replacements. They deal with those problems all day long and usually very good at key replacing services. However, couple of precautions when choosing a locksmith service. Automobile locksmiths should be equipped with training and skills and they must be well trained about automobile security. With the aid of security decoding machinery, automobile locksmiths are able to give assistance to car owners who are in trouble for losing car keys. A Car Key Locksmith not only helps with lost or stolen car keys, but can also take care of broken car keys, faulty locks, transponder key problems and lockouts.
Locksmiths fix broken locks by taking apart the lock and checking for malfunctioning pieces which may be old or damaged. By fine-tuning a lock’s interior mechanisms or replacing its bad parts,local locksmiths will have any lock, security, or alarm optimally working in a very short time. Sometimes, the locksmith may have to make custom repairs to certain items which require such work to be done at the shop using grinders, drills and similar power tools. After being repaired by a specialist, the item will be thoroughly checked to make sure it is operating properly and promptly returned to the customer. To find out how our exceptionally well trained locksmith technicians can help you, call the number above and one of our representatives will be pleased to answer any questions you may have.
Schlage is another well-known name in the lock and security sector. They are famed for creating robust electronic door locks, including keyless entry and RFID offerings. The Schlage Touchscreen is a top notch locking system. Besides being strong, it is manufactured with reinforced components, which have been rated Grade 1 on the ANSI hardware standards system. It constitutes a motorized deadbolt that relocks automatically, after being left open for 30 seconds.
The Yale Real Living lock mechanism is the perfect solution for individuals who want a home-automation system. Its’ features are no far cry from those of other high-end Yale locks, providing the option of a push button or a modern capacitive touchscreen. This locking mechanism supports up to 250 user-selected codes and also provides access via a conventional key.
Nobody likes to feel insecure. Therefore, we spend thousands of money every day on the best alarms to protect our property and prevent burglars to enter the house. The same thing is with other things. For example, you have just bought your bicycle and you don’t want to let thieves to steal it. In this case, the most important thing is to find a good locksmith service that will provide you the best service available. The locksmith service has to guarantee you that when you work with them, you are in good hands. It has to be a well-equipped and to provide you the best possible offer on the market and a variety of services such as fitting or duplicating keys, changing combinations and so on.
Whether you are a student or not you should always pay attention to which locksmith company you are going to hire. They are still your guardians and they mustn’t be too restrained. First of all – they should advise you what locks are appropriate for your door, not all of them are made for every type of door or place. Nobody can give you a better advice; with their experience, you don’t have to worry at all. They have to provide not just a good lock but also a lot of useful information that you can use to protect yourself. Sometimes a good advice is better than the best lock in the world.